FÓRUM DigiVoice

Pessoal, depois de atualizar a versão para a atual (dgvchannel-0.9.0 e voicerlib-4.0.9.0), algumas horas depois, o Asterisk travou e consegui somente ver essa mensagem no /var/log/asterisk/messages. 

May 23 07:15:00 WARNING[2805] channel.c: Hard hangup called by thread -1258681424 on DGV/13, while fd is blocked by thread -1284645968 in procedure ast_waitfor_nandfds!  Expect a failure
May 23 07:15:10 WARNING[6571] chan_dgv.c: Ká·Ká·n**: channel not connected?

  Depois tentei baixar e subir os modulos com /etc/init.d/vlibd stop e start. Depois asterisk -q para subir, mas não sobe mais. E no dmesg a seguinte mensagem:

>vlibd: vlib_cleanup_module: unloading voicerlib module.
>vlibd: vlib_cleanup_module: disabling interrupt card 0.
>vlibd: vlib_cleanup_module: disabling interrupt card 1.
>vlibd: Clean REC mmmap 0.
>vlibd: Clean REC mmmap 1.
>vlibd: Clean REC mmmap 2.
>vlibd: Clean REC mmmap 3.
>vlibd: Clean REC mmmap 4.
>vlibd: Clean REC mmmap 5.
>vlibd: Clean PLAY mmmap 0.
>vlibd: Clean PLAY mmmap 1.
>vlibd: Clean PLAY mmmap 2.
>vlibd: Clean PLAY mmmap 3.
>vlibd: Clean PLAY mmmap 4.
>vlibd: Clean PLAY mmmap 5.
>vlibd: Clean PLAY mmmap 6.
>vlibd: Clean main shared mmmap.
vlibd: Unregistering /dev/vlibd with major = 254
vlibd: VoicerLib Device Driver Unloaded!
>vlibd: vlib_init_module - Starting loading driver...
vlibd: Module /dev/vlibd using major number 254
vlibd: Driver Version: 4.0.9.0
vlibd: VoicerLib Device Driver was loaded successfully!
vlibd->init_plx: Probing Device Name: vlibd
vlibd->plx_countcards: 2 Cards Found.
kobject_add failed for vlibd with -EEXIST, don't try to register things with the same name in the same directory.
[<c01d6b50>] kobject_add+0xec/0xf2
[<c01d6b71>] kobject_register+0x1b/0x32
[<c0232dfe>] bus_add_driver+0x3e/0x87
[<c02337d3>] driver_register+0x7a/0x7d
[<c01df673>] __pci_register_driver+0x45/0x53
[<e0a313ca>] init_plx+0x72/0xe5 [vlibd]
[<e0a34380>] vlib_ioctl+0x20d/0x88e [vlibd]
[<c015d0b8>] do_ioctl+0x54/0x65
[<c015d354>] vfs_ioctl+0x180/0x18e
[<c015d38d>] sys_ioctl+0x2b/0x46
[<c01027ab>] syscall_call+0x7/0xb

   Agora o asterisk só sobe quando reiniciei o servidor. Isso já aconteceu 2 vezes somente hoje.

  Alguém sabe o que pode ser esse erro ?




Obrigado,
Diego Zuaneti Arruda