Fórum de Suporte Digivoice
Você não está logado.
Páginas: 1
Como é sabido, quando se utiliza o CB3000 TDMoE toda a sinalização de portas FXS, FXO ou mesmo de E1 é tratada no Asterisk através do DAHDI mais os pacotes adicionais de cada sinalização (Span DSP, OpenR2, LibPri, etc).
Para a transferência assistida ou não com FLASH+RAMAL em uma porta FXS do CB3000 TDMoE deve-se permitir a transferência com os seguintes parâmetros do chan_dahdi.conf (transfer e threewaycalling)
;
; Support three-way calling
;
threewaycalling=yes
;
; For FXS ports (either direct analog or over T1/E1):
; Support flash-hook call transfer (requires three way calling)
; Also enables call parking (overrides the 'canpark' parameter)
;
; For digital ports using ISDN PRI protocols:
; Support switch-side transfer (called 2BCT, RLT or other names)
; This setting must be enabled on both ports involved, and the
; 'facilityenable' setting must also be enabled to allow sending
; the transfer to the ISDN switch, since it sent in a FACILITY
; message.
;
transfer=Yes
Atenciosamente,
Equipe Digivoice.
Páginas: 1