FÓRUM DigiVoice

Boa tarde,

Fiz uma busca no internet e não consegui mais informações, tenho dois problemas

1 tenho dois chips, só está funcionando no slot 1, já coloquei chip nos outros 3 slots e não funciona.

2 desabilitei o slot 2, mas continua dando erro


WARNING[3906]: chan_dgv.c:16285 event_handler: Interruption lost in DigiVoice card 2, please verify your hardware.


---------------------------

dgv show cards

List of available DigiVoice Cards

Card Channels SerialNumber CardInterface        CardType     Sig.Interface IRQNumber Rsrvd Alrmd Lckd Free

    1        4 Unknown      DG_GSM_INTERFACE     VB0404GSM    GSM           16            1     3    1    1

----------------

Version: 1.1.8
VoicerLib Version.....: 4.2.5.6 (4256)
Firmware Versions.....:
    |_ DigiVoice Card 1: 4ch

---------------
gv show channels
List of available DigiVoice Channels

Chan Grp Context          PortId       Rsrvd Alrmd Lckd Extension   CardType     Intrf.

    1   1 XXXX                            0     0 no               VB0404GSM    GSM
    2   1 XXXX                            1     0 yes              VB0404GSM    GSM
    3   1 XXXX                            1     0 no               VB0404GSM    GSM
    4   1 XXXX                            0     1 no               VB0404GSM    GSM


--------------------------

digivoice.conf

[general]
allow_slinear=1
allow_ulaw=1
allow_alaw=1
allow_gsm=1

consolelanguage=br

[allportsconfig]
default_callprogress=cp_default.cfg
detectiontype=1
dialtype=1
afterdialpause=1000

ringbacktone1=tone1
ringbacktone2=tone1
ringbacktimes=1000,4000,1000,4000

busytone1=tone1
busytone2=tone1
busytimes=250,250,250,250

subchannelringtone1=tone1
subchannelringtone2=tone1
subchannelringtimes=100,100,100,5000

[groups]
group=1
ports=>1-4

;group=2
;ports=3-4

[general]
allow_slinear=1
allow_ulaw=1
allow_alaw=1
allow_gsm=1

consolelanguage=br

[allportsconfig]
default_callprogress=cp_default.cfg
detectiontype=1
dialtype=1
afterdialpause=1000

ringbacktone1=tone1
ringbacktone2=tone1
ringbacktimes=1000,4000,1000,4000

busytone1=tone1
busytone2=tone1
busytimes=250,250,250,250

subchannelringtone1=tone1
subchannelringtone2=tone1
[general]
allow_slinear=1
allow_ulaw=1
allow_alaw=1
allow_gsm=1

consolelanguage=br

[allportsconfig]
default_callprogress=cp_default.cfg
detectiontype=1
dialtype=1
afterdialpause=1000

ringbacktone1=tone1
ringbacktone2=tone1
ringbacktimes=1000,4000,1000,4000

busytone1=tone1
busytone2=tone1
busytimes=250,250,250,250

subchannelringtone1=tone1
subchannelringtone2=tone1
subchannelringtimes=100,100,100,5000

[groups]
group=1
ports=>1-4

;group=2
;ports=3-4

[port_config]
; -> Exemplo de configuracao para placa GSM 4 canais/portas.
signalling=gsm