FÓRUM DigiVoice

Caros,

Estou com um servidor rodando elastix 2.4.0 e a placa vb6060 apresenta problemas em intervalos irregulares.

Quando o problema aparece as mensagens de erro são:

[Mar 20 08:10:33] WARNING[27325] chan_dgv.c: EV_ERRORDETECTED card 39809, data 79

Nos logs:

Mar 20 08:20:48 localhost kernel: vlib_release: reseting card 0(0x9056).
Mar 20 08:20:48 localhost kernel: vlib_release: reseting card 0(0x9056).
Mar 20 08:20:48 localhost kernel: vlib_ioctl(0)-> VLIB_IOCTL_DISABLE_ISR
Mar 20 08:20:48 localhost kernel: vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
Mar 20 08:20:49 localhost kernel: vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
Mar 20 08:20:49 localhost kernel: ACPI: PCI interrupt for device 0000:1c:04.0 disabled
Mar 20 08:20:49 localhost kernel: vlibd: All resources closed!
Mar 20 08:20:50 localhost kernel: vlibd->init_plx: Probing Device Name: vlibd
Mar 20 08:20:50 localhost kernel: vlibd->init_plx: Counting 9030 cards: 0 Card(s) Found.
Mar 20 08:20:50 localhost kernel: vlibd->init_plx: Counting 9056 cards: 1 Card(s) Found.
Mar 20 08:20:50 localhost kernel: vlibd->init_plx: Counting cards: 1 Total Card(s) Found.
Mar 20 08:20:50 localhost kernel: vlibd->plx_probe: ->Starting probing card number 0
Mar 20 08:20:50 localhost kernel: PCI: Enabling device 0000:1c:04.0 (0150 -> 0153)
Mar 20 08:20:50 localhost kernel: ACPI: PCI Interrupt 0000:1c:04.0[A] -> GSI 42 (level, low) -> IRQ 185
Mar 20 08:20:50 localhost kernel: vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
Mar 20 08:20:50 localhost kernel: vlibd->plx_probe: ->Ending probing card number 0
Mar 20 08:20:50 localhost kernel: vlibd->init_plx: Initializing card mutexes
Mar 20 08:20:53 localhost kernel: vlib_ioctl(0)->VLIB_IOCTL_ENABLE_ISR


libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
IPv6: Loaded, but administratively disabled, reboot required to enable
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
8021q: adding VLAN 0 to HW filter on device eth0
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
vlibd: vlib_init_module - Starting loading driver...
vlibd: Module /dev/vlibd using major number 251
vlibd: Driver Version: 4.2.5.1
vlibd: VoicerLib Device Driver was loaded successfully!
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.1
rxt1: no version for "dahdi_hdlc_putbuf" found: kernel tainted.
vlibd->init_plx: Probing Device Name: vlibd
vlibd->init_plx: Counting 9030 cards: 0 Card(s) Found.
vlibd->init_plx: Counting 9056 cards: 1 Card(s) Found.
vlibd->init_plx: Counting cards: 1 Total Card(s) Found.
vlibd->plx_probe: ->Starting probing card number 0
ACPI: PCI Interrupt 0000:1c:04.0[A] -> GSI 42 (level, low) -> IRQ 185
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlibd->plx_probe: ->Ending probing card number 0
vlibd->init_plx: Initializing card mutexes
vlib_ioctl(0)->VLIB_IOCTL_ENABLE_ISR
dahdi: Detected time shift.
vlib_release: reseting card 0(0x9056).
vlibd->init_plx: Probing Device Name: vlibd
vlibd->init_plx: Counting 9030 cards: 0 Card(s) Found.
vlibd->init_plx: Counting 9056 cards: 1 Card(s) Found.
vlibd->init_plx: Counting cards: 1 Total Card(s) Found.
vlibd->plx_countcards: Calling force_cleanup before.
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
ACPI: PCI interrupt for device 0000:1c:04.0 disabled
vlibd->plx_probe: ->Starting probing card number 0
PCI: Enabling device 0000:1c:04.0 (0150 -> 0153)
ACPI: PCI Interrupt 0000:1c:04.0[A] -> GSI 42 (level, low) -> IRQ 185
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlibd->plx_probe: ->Ending probing card number 0
vlibd->init_plx: Initializing card mutexes
vlib_ioctl(0)->VLIB_IOCTL_ENABLE_ISR
vlib_release: reseting card 0(0x9056).
vlib_ioctl(0)-> VLIB_IOCTL_DISABLE_ISR
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
ACPI: PCI interrupt for device 0000:1c:04.0 disabled
vlibd: All resources closed!
vlibd->init_plx: Probing Device Name: vlibd
vlibd->init_plx: Counting 9030 cards: 0 Card(s) Found.
vlibd->init_plx: Counting 9056 cards: 1 Card(s) Found.
vlibd->init_plx: Counting cards: 1 Total Card(s) Found.
vlibd->plx_probe: ->Starting probing card number 0
PCI: Enabling device 0000:1c:04.0 (0150 -> 0153)
ACPI: PCI Interrupt 0000:1c:04.0[A] -> GSI 42 (level, low) -> IRQ 185
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlibd->plx_probe: ->Ending probing card number 0
vlibd->init_plx: Initializing card mutexes
vlib_ioctl(0)->VLIB_IOCTL_ENABLE_ISR
vlib_release: reseting card 0(0x9056).
vlib_release: reseting card 0(0x9056).
vlib_ioctl(0)-> VLIB_IOCTL_DISABLE_ISR
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
ACPI: PCI interrupt for device 0000:1c:04.0 disabled
vlibd: All resources closed!
vlibd->init_plx: Probing Device Name: vlibd
vlibd->init_plx: Counting 9030 cards: 0 Card(s) Found.
vlibd->init_plx: Counting 9056 cards: 1 Card(s) Found.
vlibd->init_plx: Counting cards: 1 Total Card(s) Found.
vlibd->plx_probe: ->Starting probing card number 0
PCI: Enabling device 0000:1c:04.0 (0150 -> 0153)
ACPI: PCI Interrupt 0000:1c:04.0[A] -> GSI 42 (level, low) -> IRQ 185
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlibd->plx_probe: ->Ending probing card number 0
vlibd->init_plx: Initializing card mutexes
vlib_ioctl(0)->VLIB_IOCTL_ENABLE_ISR
ip_tables: (C) 2000-2006 Netfilter Core Team
vlib_release: reseting card 0(0x9056).
vlib_release: reseting card 0(0x9056).
vlib_ioctl(0)-> VLIB_IOCTL_DISABLE_ISR
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
ACPI: PCI interrupt for device 0000:1c:04.0 disabled
vlibd: All resources closed!
vlibd->init_plx: Probing Device Name: vlibd
vlibd->init_plx: Counting 9030 cards: 0 Card(s) Found.
vlibd->init_plx: Counting 9056 cards: 1 Card(s) Found.
vlibd->init_plx: Counting cards: 1 Total Card(s) Found.
vlibd->plx_probe: ->Starting probing card number 0
PCI: Enabling device 0000:1c:04.0 (0150 -> 0153)
ACPI: PCI Interrupt 0000:1c:04.0[A] -> GSI 42 (level, low) -> IRQ 185
vlib_interrupt_disable : tmp=f010000 offset 68 on card 0
vlibd->plx_probe: ->Ending probing card number 0
vlibd->init_plx: Initializing card mutexes
vlib_ioctl(0)->VLIB_IOCTL_ENABLE_ISR


OS INTERRUPTS:


           CPU0       CPU1       CPU2       CPU3
  0:  494288363          0          0          0    IO-APIC-edge  timer
  8:          1          0          0          0    IO-APIC-edge  rtc
  9:          0          0          0          0   IO-APIC-level  acpi
114:    1571277          0          0          0   IO-APIC-level  ehci_hcd:usb2
130:    1495331          0          0          0       PCI-MSI-X  megasas
138:          1          0          0          0       PCI-MSI-X  eth0
146:   10395900          0          0          0       PCI-MSI-X  eth0-rx-0
154:    9712324          0          0          0       PCI-MSI-X  eth0-rx-1
162:    5904153          0          0          0       PCI-MSI-X  eth0-rx-2
170:    9033980          0          0          0       PCI-MSI-X  eth0-rx-3
178:   38562327          0          0          0       PCI-MSI-X  eth0-tx-0
185:   59329818          0          0   93668619   IO-APIC-level  /dev/vlibd
193:         26          0          0          0   IO-APIC-level  ehci_hcd:usb1
NMI:      13614       5479       4894       9762
LOC:  494281968  494281917  494281839  494281249
ERR:          0
MIS:          0

Eu já rodei o script para mudar a CPU mas não resolveu.

Não estou fazendo gravações de nenhuma forma.

Não estou rodando nada custom.

O sistema está instalado em um servidor IBM

Algum de vocês já pegou estes erros?

Pessoal do suporte pode me dar uma luz?

Att