Fórum de Suporte Digivoice
Você não está logado.
Boa noite estou enfrentando um problema com ramal quando loga fora da rede.
simplesmente ele toca eu atendo mas não sai som de ambas as parte fica mudo
ja configurei o sip_nat.conf
nat=yes
externhost=seuvoip.dyndns.org
externrefresh=60
localnet=192.168.1.0/255.255.255.0
mas nada estou migrando de elastix para meucci no elastix isso funcionava legal.
alguem pode me ajudar ?
Offline
acho que ta errado isso ai, tinha um cliente meu que estava assim ó e funcionava:
nat=yes
> externip=meudinamico.dyndns.org
> localnet=192.168.254.254/255.255.255.0
> bindport=5060
no localnet= é o endereço ip do SERVIDOR. tenta ai e por a porta tbm "pq ai tudo que for 5060 vindo de fora .. será direcionado ao servidor" :)
lá no sip.con "no ramal" vc está colocando a regra nat=yes ?
obs: no seu router está tudo certinho ?!
tenta um de cada vez.. e posta aqui pra gente.
Offline
bom ainda continua mudo quando ligo agora de dentro da rede para telefone de fora e de fora para telefones tb segue meu sip.conf
; Note: If your SIP devices are behind a NAT and your Asterisk
; server isn't, try adding "nat=1" to each peer definition to
; solve translation problems.
[general]
#include sip_general_additional.conf
nat=yes
externhost=consec.no-ip.info
externrefresh=60
localnet=192.168.1.240/255.255.255.0
bindport = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=alaw
; If you need to answer unauthenticated calls, you should change this
; next line to 'from-trunk', rather than 'from-sip-external'.
; You'll know this is happening if when you call in you get a message
; saying "The number you have dialed is not in service. Please check the
; number and try again."
context = from-sip-external ; Send unknown SIP callers to this context
callerid = Unknown
tos=0x68
language=pt_BR
; Reported as required for Asterisk 1.4
;notifyringing=yes
;notifyhold=yes
;limitonpeers=yes
;jbenable = yes
;jbforce=yes
; #, in this configuration file, is NOT A COMMENT. This is exactly
; how it should be.
#include sip_general_custom.conf
#include sip_nat.conf
#include sip_registrations_custom.conf
#include sip_registrations.conf
#include sip_custom.conf
#include sip_additional.conf
Offline
Agora quando ligo para telefones e celular tb toca quando atendo fica mudo de ambas as partes
Offline
Alguem sabe como coloca no DETALHE PEER e no DETALHE DO USER para configurar tronco FXO ??
pois fiz essa configuração abaixo ela ate mostra no meu cell que saiu pelo tronco mas fica mudo, ja na linha da tmas funcionou blz
essa é a configuração que fiz para conectar no ATA FXO ele mostra os tronco online mas porem não registrado
DETALHE PEER
allow=gsm&ulaw&alaw
context=from-pstn
disallow=all
dtfmode=rfc2833
dynamic=yes
fromdamoin=192.168.0.252 -- ip ata
fromuser=9010
host=192.168.0.252
insecure=very
qualify=no
reinvite=no
secret=*****
type=peer
username=9010
DETALHE DO USER
canreinvite=no
context=from-internal
dynamic=yes
fromuser=9010
host=192.168.0.252
insecure=very
nat=yes
secret=*****
type=user
username=9010
Offline
souzalinux escreveu:
bom ainda continua mudo quando ligo agora de dentro da rede para telefone de fora e de fora para telefones tb segue meu sip.conf
; Note: If your SIP devices are behind a NAT and your Asterisk
; server isn't, try adding "nat=1" to each peer definition to
; solve translation problems.
[general]
#include sip_general_additional.conf
nat=yes
externhost=consec.no-ip.info
externrefresh=60
localnet=192.168.1.240/255.255.255.0
bindport = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=alaw
; If you need to answer unauthenticated calls, you should change this
; next line to 'from-trunk', rather than 'from-sip-external'.
; You'll know this is happening if when you call in you get a message
; saying "The number you have dialed is not in service. Please check the
; number and try again."
context = from-sip-external ; Send unknown SIP callers to this context
callerid = Unknown
tos=0x68
language=pt_BR
; Reported as required for Asterisk 1.4
;notifyringing=yes
;notifyhold=yes
;limitonpeers=yes
;jbenable = yes
;jbforce=yes
; #, in this configuration file, is NOT A COMMENT. This is exactly
; how it should be.
#include sip_general_custom.conf
#include sip_nat.conf
#include sip_registrations_custom.conf
#include sip_registrations.conf
#include sip_custom.conf
#include sip_additional.conf
por uma questão de teste aqui ó:
bindport = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0
ao invez de deixar o numero em 0.0.0.0 especifique o numero ip do servidor.
dê reload e logo em seguida teste.
obs: aparentemente "o servidor está correto"..
substitua o roteador e reveja a configuração.
só lembrando as portas para se abrirem no roteador é
5060UDP
range de 10.000 a 20.000 RTP.
abraço.
Offline
souzalinux escreveu:
Boa noite estou enfrentando um problema com ramal quando loga fora da rede.
simplesmente ele toca eu atendo mas não sai som de ambas as parte fica mudo
ja configurei o sip_nat.conf
nat=yes
externhost=seuvoip.dyndns.org
externrefresh=60
localnet=192.168.1.0/255.255.255.0
mas nada estou migrando de elastix para meucci no elastix isso funcionava legal.
alguem pode me ajudar ?
um outro detalhe tbm verifique se o iptables nao esteja ativo, se estiver siga:
#Redirecionando tudo que chegar no ip publico para a maquina local
-A PREROUTING -d XXXXXXXXX -p tcp -m tcp --dport 5060:5082 -j
DNAT --to-destination 192.168.1.37
-A PREROUTING -d XXXXXXXXX -p udp -m udp --dport 5060:5082 -j
DNAT --to-destination 192.168.1.37
-A PREROUTING -d XXXXXXXXX -p tcp -m tcp --dport 8000:20000 -j
DNAT --to-destination 192.168.1.37
-A PREROUTING -d XXXXXXXXX -p udp -m udp --dport 8000:20000 -j
DNAT --to-destination 192.168.1.37
-A FORWARD -p tcp --dport 5060:5082 -j ACCEPT
-A FORWARD -p udp --dport 5060:5082 -j ACCEPT
-A FORWARD -p tcp --dport 10000:20000 -j ACCEPT
-A FORWARD -p udp --dport 10000:20000 -j ACCEPT
#LIBERANDO NAT destas portas para todos
-t nat -A POSTROUTING -p tcp -o $ext_if -s $lan --dport 4569:4570 -j
MASQUERADE
-t nat -A POSTROUTING -p udp -o $ext_if -s $lan --dport 4569:4570 -j
MASQUERADE
Offline
Boa tarde,
Estou com muita dificuldade na programação do meucci,
sou iniciante, gostaria de uma ajuda na criação de um tronco,
para poder receber ligações externas.
detalhes do equipamento:
2 Ata's
PC -( 80Gb HD, 3G Ram, processador pentium 4, 1 placa Placa Digium Tdm400 2fxo/1fxs)
Switch Linksys Cisco Ef4116 - 16 Portas 10/100
Abrações,
Rodrigo.
Offline